Stainless Steel Rectangular Hollow section

  • Stainless Steel Rectangular Hollow Sections


    RECTANGULAR Weight [kg/m]
    H x B [mm] 1.0 1.2 1.5 2.0 3.0 4.0 5.0 6.0
    30 20 0.772 0.921 1.140 1.495 2.167
    40 20 0.932 1.112 1.379 1.814 2.645
    50 20 - 1.304 1.618 2.133 3.124
    50 25 - 1.399 1.738 2.292 3.363
    50 30 1.251 1.495 1.858 2.452 3.602
    60 20 1.251 1.495 1.858 2.452 3.602
    60 30 - 1.686 2.097 2.771 4.081
    60 40 - 1.878 2.336 3.090 4.559
    70 30 - - 2.336 3.090 4.559
    70 50 - - 2.814 3.728 5.516 7.255
    80 20 - - 2.336 3.090 4.559
    80 40 - - 2.814 3.728 5.516 7.255
    80 60 4.366 6.473 8.531
    90 30 - - 2.814 3.728 5.516 7.255
    100 50 4.685 6.952 9.169 11.336 -
    100 60 - 7.430 9.807 12.133 14 410
    100 80 - 8.387 11.083 13.728 -
    120 60 - 8.387 11.083 13.728 16.324
    120 80 - 9.344 12.359 15.323 18.237
    140 80 10.301 13.635 16.918 20.151
    150 50 9.344 12.359 15.323 -
    150 100 11.736 15.548 19.310 23.022
    160 80 11.258 14.910 18.513 22.065
    200 100 14.129 18.738 23.298 27.807

    * Other dimensions may be available on request

    TOLERANCES (according to EN 10219-2)
    Characteristic Tolerance
    Outside dimensions, B and H ± 1 %. with a minimum of ± 0.5 mm. when B. H < 100 mm
    ± 0.8 %. when 100 mm iB,Hs 200 mm
    Concavity / Convexity (XIX2) Max. 0.8 % with a minimum of 0.5 mm
    Wall thickness, T ± 10 %, when T < 5 mm
    ± 0.5 mm, when T > 5 mm
    Squareness of sides 90° ± 1°
    External corner profle, C1.C2 or R{1) Maximum 1.5T, when T < 3 mm and B,H £ 100mm
    1.6T - 2.4T, when T > 3 mm and B.H < 100mm
    2T - 3T, when T s 4 mm and B.H > 100mm
    Length, L (2) Standard length 6000 mm, tolerance -07+20 mm
    Straightness 0.15% of total length
    Twist 2 mm + 0.5 mm/m
    Weld position Narrow side in Rectangular hollow section
    (1) Exception from standard
    (2) Better than standard Length tolerance 0/+ 50mm

    * This dimension is maximum when measuring B or H and minimum when measuring T